Kyoritsu 6202 Instrukcja Użytkownika Pobierz pdf (Strona 13)

―

Outer dimension and weight

Outer dimension: 185(L) × 167(W) × 89(D)mm

Weight: Approx. 1kg (only the instrument body)

Symbols used on the instrument:

F Equipment protected throughout by DOUBLE INSULATION or

REINFORCED INSULATION

Caution (Refer to the accompanying instruction manual)

！

5．1 Visual inspection

Before starting a measurement, user should undertake visual checks on the

mains cord, case and that the correct type and rated fuse is fitted to the DUT.

And also there should be no evidence of damage of a nature that may impair

the electrical safety of the item.

5.2 Connection to mains power supply

5.2-1 Connection of mains cord

Set the range switch on the instrument to "VOLT" range and insert the socket

of mains cord to the instrument. Then connect the plug to the outlet of mains

power supply.

CAUTION

● Always be sure to check there is no abnormal conditions or damages on

the instrument and cords. If any evidence of abnormality found,

measurement shall be stopped immediately.

● The outlet of mains power supply must have earth terminal.

● This instrument can be only connected to the commercial power of

230V+10%-10%, 50/60Hz.

！

5. Preparation before a measurement

Fig.7

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Brak uwag

Kyoritsu 6202 Instrukcja Użytkownika Strona 13